[TenTec] [Boatanchors] Bird Termaline 50 Ohm load - 82A - Need adapter

D C *Mac* Macdonald k2gkk at hotmail.com
Wed Nov 17 08:38:40 PST 2010


It is definitely NOT a type C. Type C is the same size
as type N but is a bayonet instead of threaded connector
(a maxi BNC, so to speak).

Type C is my absolute favorite coax connector.
 
It would appear that the connetor on the 82A is one that
would have been used on the old RG-17/U coax.
 
I don't know the type number, but will try to research it
later today in my old 73 Magazine Coax Handbook.

* "An unarmed man can but flee *
* from evil. Evil can NEVER be *
* overcome by flight FROM it." *

* * * * * * * * * * *
* 73 - Mac, K2GKK/5 *
* (Since 30 Nov 53) *
* Oklahoma City, OK *
* USAF, Ret (61-81) *
* * * * * * * * * * *



> From: km1h at jeremy.mv.com
> To: mellema at qis.net; boatanchors at mailman.qth.net; tentec at contesting.com
> Date: Wed, 17 Nov 2010 10:59:13 -0500
> CC: mortonph at comcast.net
> Subject: Re: [Boatanchors] Bird Termaline 50 Ohm load - 82A - Need adapter
> 
> Attachments automatically get stripped on QTH forums.
> 
> There is a good chance the connector is a Type C.
> 
> Carl
> KM1H
> 
> 
> 
> ----- Original Message ----- 
> From: "Bill Mellema" <mellema at qis.net>
> To: <boatanchors at mailman.qth.net>; "Discussion of Ten-Tec Equipment" 
> <tentec at contesting.com>
> Cc: "Peter Morton" <mortonph at comcast.net>
> Sent: Wednesday, November 17, 2010 10:44 AM
> Subject: [Boatanchors] Bird Termaline 50 Ohm load - 82A - Need adapter
> 
> 
> >I have a friend who just bought a used Bird 500 watt Termaline 50 ohm load, 
> >model 82A. It has a coaxial connector as shown in the photo linked below. 
> >He needs an adapter to adapt this connector to type N (or UHF) like the one 
> >sitting on the table in the photo. (The photo is not of the 82A that I 
> >have but it illustrates the connector and the adapter I need.) The 
> >connector on the load measures 1.125 in. diameter across the threads. The 
> >QC type connectors now used on Bird products is not what is used on the 
> >model 82A.
> >
> > Does anyone know where he can purchase an adapter?
> >
> > Thanks In Advance,
> >
> > Bill N3WM
> >
> >
> >
> >
> > ______________________________________________________________
> > Boatanchors mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Boatanchors at mailman.qth.net
> >
> > List Administrator: Duane Fischer, W8DBF
> > ** For Assistance: dfischer at usol.com **
> >
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html 
> 
> ______________________________________________________________
> Boatanchors mailing list
> Home: http://mailman.qth.net/mailman/listinfo/boatanchors
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Boatanchors at mailman.qth.net
> 
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com ** 
> 
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html 		 	   		  


More information about the TenTec mailing list