[TenTec] Eagle on TB.....Who sells a box to do the switching with the keying?

Rick - NJ0IP / DJ0IP Rick at DJ0IP.de
Sat Oct 23 10:46:50 PDT 2010


The Cadilac solution would be to purchase a MicroHAM II.
Use its keyer and key and PTT outputs.

The slickest thing I've found at a good price is in Germany.
It's called the MemoKeyer, with kits starting at  29 Euro (about $38).
The down side is, the documentation is in German.
I will check with them and see if they have it available in English.
You can get a fully built module (supply your own box) for 37 Euro (about
$50).

The PTT delay is set as a relationship to the length of a dit.
That way it varies with the speed.  Sexy.

The HamGadgets MasterKeyer MK-1 might do the job.
It was unclear from their advertising; they hinted at it.

I seem to recall that the WinKey could do this too, but you can only adjust
it by software.

Finally, Phil, AD5X has a written an article about a tiny little PC board
with just a few parts on it that will do the job if you modify the values of
2 of the components.

Then there's the one I built 30 years ago.
I could send you the schematic.

I don't know of a cheap "Turnkey" solution.
There are plenty of cheap solutions if you are willing to do a bit of
assembly.

73
Rick

-----Original Message-----
From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
On Behalf Of al sirois
Sent: Friday, October 22, 2010 7:14 PM
To: 'Discussion of Ten-Tec Equipment'
Subject: Re: [TenTec] Eagle on TB.....Who sells a box to do the switching
with the keying?

I have a Jupiter that could use the same arrangement.
alsirois at roadrunner.com
or N1MHC at arrl.net
=======================

-----Original Message-----
From: Rick - NJ0IP / DJ0IP [mailto:Rick at DJ0IP.de] 
Sent: Friday, October 22, 2010 4:25 PM
To: 'Discussion of Ten-Tec Equipment'
Subject: Re: [TenTec] Eagle on TB

That's right Petr;  for now you have to modify the rig yourself, or purchase
an external box that switches with the keying.



-----Original Message-----
From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
On Behalf Of Petr Ourednik
Sent: Friday, October 22, 2010 2:27 PM
To: tentec at contesting.com
Subject: [TenTec] Eagle on TB

Hello,

I realized the Eagle radio has not ext. RX ant port...is it right?

73 - Petr, OK1RP
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec


_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec



More information about the TenTec mailing list