[TenTec] question on TT- 546

[Mike Hyder -N4NT-]

Also...  if you can wiggle the bandswitch and restore the function, it 
probably needs cleaning.

Mike N4NT

----- Original Message ----- 
From: "JOSEPH DAVIS" <iloveantennas at dishmail.net>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Friday, October 29, 2010 11:16 AM
Subject: Re: [TenTec] question on TT- 546


> Thanks for ur answer,will try this . jjdavis
>
> On Thu, Oct 28, 2010 at 11:03 AM, Rick - NJ0IP / DJ0IP 
> <Rick at dj0ip.de>wrote:
>
>> There's something wrong in the local oscillator.
>> Check around the area where the crystal is for 80m and resolder the
>> connections.
>>
>> 73
>> Rick
>>
>> -----Original Message-----
>> From: tentec-bounces at contesting.com 
>> [mailto:tentec-bounces at contesting.com]
>> On Behalf Of JOSEPH DAVIS
>> Sent: Thursday, October 28, 2010 8:58 AM
>> To: TenTec at contesting.com
>> Subject: [TenTec] question on TT- 546
>>
>> On 80 meters occasionally frequency output goes to 1.000 mhz and receiver
>> goes dead. After a while will go on again.  Other freq. ranges OK. Any 
>> one
>> have any ideal? Thanks jjdavis