[TenTec] Question about OMNI-VII One Plug GUI sending CW with CW Type

[Henry, John]

Hi Carsten,

Normally you just click on CW TYPE in the CONSOLE window, then start
typing in the CW Type Entry box on the CW TYPE window.
If it does not transmit, but the PTT DOES Transmit, then you probably
need to change the CW Keyer setting to either Mode A or Mode B.
True, The CW KEYER mode has nothing to do with whether it should key
or not via CW TYPE, but the internal keyer state machine in the
OMNI-VII will not run unless it is turned on, e.g. either Mode A or
Mode B.
Let me know if that does not resolve your issue.

Thanks,
John
KI4JPL