[TenTec] eagle

[wa3fiy at radioadv.com]

With the Eagle you can easily know what output power you have.  There is a "POWER" 
adjustment, the value of which is displayed on screen.  If the ALC light is flashing on voice 
modulation or on solid on cw key down, the PEP output power is equal to the power level 
displayed. 

Go back a few years to the TT Triton.  When I first got mine I had similar concern since the 
Triton meter only displayed SWR on TX.  That concern was quickly put to rest after operating 
the rig a short time and realizing that the ALC light was giving me more accurate info than the 
meter could ever do and I had a constant check on the quality of load impedance.   TT just 
stuck with a good thing on the Eagle.    :-)

-Lee-

WA3FIY



On 31 Mar 2011 at 15:46, ROD wrote:

> I just got off a round table with 8 hams all like to see the power
> output of there radios. swr just tells you have reflected power  witch
> is what you want but, they all wanted to know there power output with
> the eagle you do not know if you have 30w 56w 87w or 100w. output.
> _______________________________________________ TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>