[TenTec] 425 Failure

[mike bryce]

RF parts sells high voltage wire

a good (really good) test lead wire will work.

strip off the shield of a RG-8 and that will work

call the factory and have a hunk sent to you.

mike

Mike, WB8VGE
SunLight Energy Systems
The Heathkit Shop
http://www.theheathkitshop.com/
J e e p
o|||||||o 
Note: No trees were killed in the sending of this message, but a large number of electrons were terribly inconvenienced



On Aug 16, 2011, at 12:22 PM, Jim Brown wrote:

> On 8/16/2011 9:00 AM, Art Trampler wrote:
>> Do you know if there is anything "special" about the wire that carries 
>> the HV from the RF choke to the plate caps, and do you know if I can 
>> replace the RF choke in the Titan with the RFC-3 made by RF Parts?
> 
> I saw your questions about the choke and wiring, but didn't know the 
> answer, so didn't respond. :)   My guess about the wire is that you 
> should use something rated for 3-5kV, but it doesn't need to be heavy 
> gauge. .
> 
> 73, Jim K9YC
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>