[TenTec] 425 Grid Protection Circuit

[Art Trampler]

Jim,
 
I had thought of the GM3SEK board, too, but the capabilities of that board are far beyond a simple grid trip circuit that I thought I'd ask about this perhaps simpler solution.
 
I am not a mindless Ten-Tec cheerleader...but I wonder why that OM so despises the brand!
 
73--and I'll check in with the Amps reflector.
Art

--- On Fri, 8/19/11, Jim Brown <k9yc at audiosystemsgroup.com> wrote:


From: Jim Brown <k9yc at audiosystemsgroup.com>
Subject: Re: [TenTec] 425 Grid Protection Circuit
To: tentec at contesting.com
Date: Friday, August 19, 2011, 10:45 AM


On 8/18/2011 11:13 PM, Art Trampler wrote:
> Have any of you built and installed a grid protection circuit such as the
> one proposed by (no fan of Ten-Tec)

I've thought about building the one by GM3SEK, but never gotten around 
to it.

You might get a more intelligent response to this question by asking on 
the AMPS reflector, where there are a bunch of serious amplifier 
builders. I think SEK hangs out there sometimes.

73, Jim K9YC
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec