[TenTec] CorsairII notch potentiometer

[Steve Hunt]

Neil,

For some reason I'm not receiving list postings via my email - only just 
found your response on the web archive for the list.

This is a "spare" Corsair I bought very cheaply a year or so ago. I only 
just noticed the pot was very noisy. After rotating it back and forth a 
few times to "clear" it, it stopped working altogether apart from the 
first 30 degrees or so of rotation. Ohm meter confirmed that the rear 
section was going O/C and upsetting the DC conditions around the filter.

I just pulled the board and pot out, and I measure the good gang as a 
220k log. I tracked down a replacement locally which I hope will fit 
physically. I'll let you know how it goes.

Incidentally I've just completed the N4YG DDS mod on this radio and am 
very pleased with the results.

Steve G3TXQ