[TenTec] Corsair II U10 Problems

[John Graves]

Ah.. In a effort to confuse me if not the entire group, I have a 
question that is slightly off topic? If the AADE dial works with a 
Corsair, will it work with my "beloved" Argosy.  This is the orginal, 
with an analog dial and the expected PTO tuning, I think.

John Graves
WA1JG
jh.graves at verizon.net

On 5/30/2011 10:00 AM, Jerry Haigwood wrote:
> Bob,
>       The AADE display will not work without modifications.  The problem
> comes the way Ten Tec did the HFO/PTO mixing scheme.  On some bands the 9MHz
> IF frequency is subtracted from the HFO/PTO mix to get the correct frequency
> display.  On other bands, 9MHz is added to the HFO/PTO mix to get the
>