[TenTec] corsair II display

[Jerry Haigwood]

Hello Dave,
    I have been working with AADE to develop a display to replace the
display in the Corsair II ( it should also work on the Corsair).  WA9Z, Jim,
has actually completed installing the AADE into his Corsair II.  Basically
it requires you to remove the front panel, remove the old display and logic
board, do some cutting on the box that holds the display, install the AADE
display, glue the 4 LED along the top of the display into the front panel,
re-mount the board that controls those 4 LEDs, and finally put everything
back together.  It is not a job for the appliance operator but it is not all
that hard.  Being able to fix my own radio is one reason I purchased my
Corsair II.  Jim documented his fix with a few pictures.  Either he  or I
will be putting up a web page about the fix.
    Before you start replacing the current display, tell us what it is or is
not doing.
Jerry W5JH

-----Original Message-----
From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
On Behalf Of k8bbm at srt.com
Sent: Friday, June 24, 2011 8:50 PM
To: tentec at contesting.com
Subject: [TenTec] corsair II display

saw earlier thread, who's experimenting with a chip to replace the chip that
controls the display?
my beloved cII is acting up.
thanks
dave nd0cw at srt.com
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec