[TenTec] Corsair CW question

[Andrew Moore]

Right Dave... there is a jumper that needs to be removed when an optional
filter (250/500/1.8k) is installed, and installed when all optional filters
are removed (that is, all excepting the 2.4k, which is always in place).

Often the previous owner will remove the optional filters to sell
separately, but will forget to re-install the jumper.  It's likely that the
previous owner had no idea a jumper was even required.

So just find the appropriate spot and install the jumper.  I can dig up the
location if you need it.

--Andrew, NV1B


On Sat, Mar 26, 2011 at 6:39 PM, <d.e.warnick at comcast.net> wrote:

>
>
> As I recall, the Corsair's had a jumper added in each filter's position if
> it was not equipped. Do a quick check by taking the cover off and looking at
> the 500 hz filter position. If the jumper is missing, simply add it. It
> should be diagonal in the filter position. Your manual should help with this
>
> Dave
>
> WA3F
>
>
> ----- Original Message -----
> From: tubsc66 at aol.com
> To: tentec at contesting.com
> Sent: Saturday, March 26, 2011 6:21:56 PM
> Subject: [TenTec] Corsair CW question
>
> Hi everyone, I've added a Corsair to my TT arsenal, its an original grey
> version, only has the
> stock 2.4 khz filter. Works great in SSB, fantastic receiver, however, when
> I switch the mode
> switch to cw, the receiver goes silent. Is this due to the absence of a 500
> hz filter or does it
> sound like something is amiss? Ive read the manual but cant find this issue
> addressed.
> BTW, if anyone has a 500 hz filter for sale, please drop me a note, 73's
>
> Chris KC5IIE
>
>
>
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>