[TenTec] Corsair CW issue

d.e.warnick at comcast.net d.e.warnick at comcast.net
Sun Mar 27 17:21:09 PDT 2011

Yep, leave the jumper in place if the filter is not installed. 



----- Original Message ----- 
From: tubsc66 at aol.com 
To: tentec at contesting.com 
Sent: Sunday, March 27, 2011 6:11:11 PM 
Subject: Re: [TenTec] Corsair CW issue 

 Thanks for the help fellas, the jumper was missing in the 1.8kc filter position, I installed one, and now I can 
use the 2.4kc position when in the CW mode. Curiously, when Im in SSB mode, I can switch the xtal position 
to the 1.8kc spot (xtal "2") and still receive, when in CW mode, I can only listen in the 2.4kc spot (xtal "3"), 
the other 2 positions are still deaf. So, if I obtain a 500hz filter but leave the 1.8 slot empty, do I leave the 
jumper connected? BTW, the manual shows the only jumper to be in the 1.8 slot, there's no jumper associated 
with the 500hz slot. Thanks so much! 73's 

Chris KC5IIE 


TenTec mailing list 
TenTec at contesting.com 

More information about the TenTec mailing list