[TenTec] Interfacing Computers to Rigs

[Jim Brown]

On 10/30/2011 6:57 PM, WESLEY ATTAWAY wrote:
> To chime in on the subject, I think Jim has done a real good job explaining some
> subject matter that is mystifying to most hams.  He debunks a lot of myths and
> steers people in the right direction for many topics ..... noise suppression and
> impedance matching to name a couple.  Jim gives hams the option of being able to
> simply solve a problem (winding some coils, or whatever, to accomplish a goal)
> or to go further and actually try to understand the underlying theory.
>
> His approach is fairly straight-forward but he does have to go into discussions
> of theory in order to make his points.

Thanks Wes. Yes, you've hit it exactly right -- because the fundamentals 
of how ferrites behave is so different from what most hams (and most 
engineers) have long thought, it was necessary that I go into some 
detail to convince them of the correctness of what I was saying.  When 
you're debunking myths, you must PROVE it with both logic and 
experimental work that backs up what you're saying.  As Neil Muncy said 
to me when discussing those who questioned his initial work, "I've 
completely described by test setup, anyone can duplicate it and confirm 
the result."  I've tried to follow his example.  I had to use a 
DIFFERENT test setup because I was working at RF, while he was working 
at audio frequencies, but my work was in complete agreement with his, 
and with his statement that most RFI was the result of Pin One Problems.  .

Not that what I've been saying is completely new -- in doing the 
research, I found references to the METHODS in manufacturers 
recommendations dating back to the early 60s, but without technical 
discussions of WHY.  AND, primary texts by the most widely accepted 
expert on the subject were never widely published, and have been out of 
print for several decades.

73, Jim Brown K9YC