[TenTec] TEN TEC OMNI D ver C

[Glenn]

Heads up. I just serviced an EXCEPTIONALLY nice Omni D version C which contains the 1.8KHz optional filter.

This is the nicest Omni C I have seen since they were new in the 80's.


The vinyl on the case is not torn less a .25 inch place on the back edge and I suspect this was stock from application.
Additionally, there is one corner on the back bottom left side that may have been a slight original defect. There is no damage on
the out side cabinet. I only mention this since it is the only thing keeping me from calling this unit MINT.


So, if you are looking for a near perfect Omni C, freshly serviced in my Lab, this is it. Switches have been cleaned with DeOxit and the alignment checked.
Only minor tweaking was required. The PTO has obviously had very little use..(No warble, no rough spots, just very smooth)


I know the original owner and he is a hard core collector. He may have never used it for more than an hour or two,,,


It will post on ebay tonight at 8:30EST


73,
Glenn WA4AOS
DSM Labs  (dot com)