[TenTec] Omni 6 Opt.3 to FL-2100B

[al sirois]

What I do is the following:

>From the FL-2100-B bring the RCA relay conductors to a manual switch to a
convenient location next to my keyer.
When I want to activate the amp, I just flip the switch, when I want to
listen, I just flip the switch back.

N1MHC at arrl.net  (Al)
==============


-----Original Message-----
From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
On Behalf Of Gary Winkelman
Sent: Thursday, November 17, 2011 11:29 AM
To: tentec at contesting.com
Subject: [TenTec] Omni 6 Opt.3 to FL-2100B

.  I need advise on keying the FL-2100B from my Omni 6.  Some say they have
used the Relay jack on the Omni 6 straight to the keying jack of the amp.
Others say that doing it that way will result in "hot switching" and will
do damage.  Some say to use the TXOUT/TXEN jacks on the Omni to an external
relay like the Keyall.  Then there are all kinds of confusing stuff about
timing and whatnot with that scenario.  I have read Tom and Rick's
informative articles that I understood some.  Maybe both ways of keying the
amp are good but there does not seem to be a consensus.   Any assistance is
appreciated!  73, Gary  N2UM
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec