[TenTec] trouble interfacing OMNI VI to N1MM via serial port

Joseph Holstein n8ea at prodigy.net
Thu Nov 17 09:36:14 PST 2011


followed instructions in the TenTec manual and have pins 2 and 3 and 7 on the DB 25 going to the DB 9 . DB 9 has pins 4 and 6 shorted. Followed directions in N1MM for Omni VI - 1200 baud etc.  Pin 5 on DB9 connects to pin 7 on the DB25.  Any suggestions ?
73 joe n8ea


More information about the TenTec mailing list