[TenTec] Question

[Floyd Sense]

No - the VFO-B frequency is not shown.   If enough folks ask Moe to add 
that feature, maybe it will happen.    Over time, I've decided that 
showing the VFO-B position on the trace is less important that I first 
thought.  When you move the cursor into the trace window, the frequency 
indicated by the point on the cursor does display to the left below the 
window.  So, you can quickly read the frequency you want to try calling 
on and manually set VFO-B via the Orion knob.

  I've found that while watching a trace of a pile up, it's rare to be 
able to actually pinpoint the guy that the DX station is currently 
working.  Even when the DX station calls "W4XXX ONLY", you'll still see 
6 stations answer him and that will continue till the end of the contact!

73, Floyd

On 10/9/2011 7:05 AM, Simone wrote:
> Hi Floyd,
> can you see a orion's vfo-b position
> on SpectraVue ?
> This is very important for pile up split
> operations.
> 73 Simone IZ5DKJ
>
>