[TenTec] Getting started in digital modes

[Rick - DJ0IP / NJ0IP]

John, here is a good tutorial with pictures, etc:
http://myplace.frontier.com/~nb6z/start.htm 

Gud Luk!
Rick, DJ0IP


-----Original Message-----
From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
On Behalf Of John K3GHH
Sent: Thursday, October 20, 2011 9:23 PM
To: tentec at contesting.com
Subject: [TenTec] Getting started in digital modes

I hope someone can direct me to a beginner's tutorial on this topic 
somewhere.

I just hooked my new TigerTronics SignaLink USB box between my Linux 
(Kubuntu 11.04, Natty) computer and my Orion II, after properly 
installing the four jumper wires in the SignaLink. I fired up Fldigi, 
configuring its audio (using the "PortAudio" option) capture and 
playback as "USB Audio CODEC..."

At first I mistakenly plugged the 8-pin plug, on the cable from the SL, 
into the wrong socket on the Orion (the lower one of the two, I forget 
what it's called, designed for the remote control accessory); I hope 
that didn't do any damage.

But... I don't know what to do next! There are some digital signals 
around 14.085 and they show up on the Fldigi waterfall display but with 
"OpMode" RTTY45 no text appears. Maybe it's not RTTY (or, at least, 
RTTY45) at all... I tried a few other OpMode's and with MFSK8 text is 
written to the receive pane, but it's random letters and symbols 
unrelated to what I can hear on the O2 speaker.

Needless to say, it seemed prudent not to try any transmitting yet.

Any suggestions where I can go for some step-by-step guidance? Yahoo 
linuxham, maybe, but it seems focused on hamlib...

-- 
John K3GHH

_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec