[TenTec] Corsair II PTO replacement

[Steve Hunt]

I'm pretty happy with the DDS performance now, so if anyone is 
interested here is the final schematic of the PIC controller board:
http://www.karinya.net/g3txq/corsair_pto/schematic.pdf

And this is the schematic of the DDS module available off eBay:
http://www.karinya.net/g3txq/corsair_pto/dds_module_schematic.pdf

In due course I'll produce a write-up on my web site and post the PIC code.

73,
Steve G3TXQ

On 10/09/2011 21:00, Steve Hunt wrote:
> Having learned a little about PICs and what they can do, and inspired by
> N4YG's DDS system, I though I'd also learn a little about DDS
> technology. So I set about trying to build a "drop-in" DDS replacement
> for my Corsair II PTO. I though folks might be interesting in seeing the
> results!
>
> Here's a photo of the parts:
> http://www.karinya.net/g3txq/corsair_pto/pto_parts.jpg
> Left rear is a hand-wired prototype board containing the PIC controller
> and a DDS buffer and low-pass filter.
> Left front is a pre-assembled board containing an AD9851 DDS chip,
> reference oscillator , and low-pass filter - available from eBay
> Right rear is an identical enclosure to that of the original PTO cut
> from aluminium channel
> Right front is the optical encoder
>
> Here's a top photo of the complete assembly showing the DDS daughter board:
> http://www.karinya.net/g3txq/corsair_pto/pto_top.jpg
>
> And a bottom photo showing the PIC board:
> http://www.karinya.net/g3txq/corsair_pto/pto_bottom.jpg
>
> This was only ever intended as another learning exercise. The DDS works
> exactly as the PTO does, and mounts with the same fixing holes. There is
> no Split capability, but it responds to the normal Corsair Offset signal
> and the Shift signal. The only nod to modernity is a 5kHz/turn tuning
> rate which speeds to 50kHz/turn when you spin the knob quickly!
>
> I'm still checking out the operation. I doubt I'll go to proper PCBs,
> but it's nice to know that if TT ever run out of re-build kits I can
> drop this in as a "minimum effort" replacement.
>
> 73,
> Steve G3TXQ
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>