[TenTec] Count to Ten B4 Cussing Ten Tec

Greg S oldlongbeard at yahoo.com
Tue Sep 13 13:50:52 PDT 2011


Far as I'm concerned, when it comes to Mother Nature, all bets are off. We had a nearby strike a few years back. Lost most appliances (was before I was a Ham). , and power company had to come out and get things settled again. When the lineman was done, he brought half of the Ceramic Insulator that was left on the pole. The ceramic was MELTED, and I found the balance of the melted ceramic chunks lying on the ground in a 40 foot radius from the pole. If it hits, It's gonna hurt something if it has a mind to, no matter what YOUR plan is for it. Now, I have none of my radio equipment grounded, cuz lightni is TRYING to get to ground, right? It's worked so far, so it must be right. (Toungue in cheek.... kinda).

73-
Greg Schippers, KC8HXO
 



"Those who would give up essential liberty to purchase a little temporary safety deserve neither liberty nor safety."    - Benjamin Franklin



________________________________
From: Stuart Rohre <rohre at arlut.utexas.edu>
To: tentec at contesting.com
Sent: Monday, September 12, 2011 5:07 PM
Subject: Re: [TenTec] Count to Ten B4 Cussing Ten Tec

The put your coax connector in a glass jar is an old ham's tale.  NOT 
EFFECTIVE!

Glass canning jars are good for maybe 500 volts tops.  You may find 
lightning at 100 times that.

Also, the energy in a surge heats up the air inside the jar, increasing 
the pressure, which can splinter the jar.

And, if the jar has any remnants of metallic seals or labels, or a wire 
lid hold down, it will charge those spontaneous electrodes to harmful 
voltages.

You need a smooth path to earth, no sharp bends in your earthing 
conductor.  A minimum of no. 8 gauge wire, and preferably no. 6 gauge.

Earth leads need to be clamped or welded, never soft soldered.

-Stuart Rohre
K5KVH
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec


More information about the TenTec mailing list