[TenTec] OII VOX settings

John Simon jrsimon at ozemail.com.au
Fri Sep 16 17:10:27 PDT 2011


Many thanks for the replies gentlemen.   I think I can see where I was going 
wrong, all very helpful.
Tnx agn.




John de VK2XGJ
Life is like a hot bath, the longer you're in it,
the more wrinkled you become.

-----Original Message----- 
From: Rsoifer at aol.com
Sent: Saturday, September 17, 2011 3:04 AM
To: tentec at contesting.com
Subject: Re: [TenTec] OII VOX settings

FWIW, my VOX settings for the 707 mic are VOX trip level 5%, ANTI-VOX 20%
and VOX hang 0.60.

73 Ray W2RS


In a message dated 9/16/2011 4:56:13 P.M. GMT Standard Time,
natan1945 at gmail.com writes:

John,

I use the same radio and headset as you do.  The  "VOX" settings I use are:

VOX Trip level  7%
ANTI-VOX Level is  20%
VOXHang is 0.40 sec.

However, those are tailored for CW since I  use a foot switch for the little
voice operation I do.  I suspect the  type of cartridge used affects the
settings too.  My numbers are for a  HC-5 unit.  Heil now makes three
elements for the headset so if you  are using anything other than the HC-5,
the numbers might be off a bit,  however, the numbers I gave you should get
you close.

Good  Luck,

Natan W6XR/2
Freeville, NY

On Fri, Sep 16, 2011 at 3:39  AM, John Simon <jrsimon at ozemail.com.au> wrote:

> I've just  acquired a Heil  Proset 5 headset for my Orion 566 and not
being
>  used to the VOX operation I was wondering what settings other users have
on
> their OII's.
>
>
>
>
> John de  VK2XGJ
> Life is like a hot bath, the longer you're in it,
> the  more wrinkled you become.
>
>  _______________________________________________
> TenTec mailing  list
> TenTec at contesting.com
>  http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec  mailing  list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec 



More information about the TenTec mailing list