[TenTec] new RX366 sub receiver

[Rsoifer at aol.com]

John,
 
Since you mention an Orion III, what is planned for it besides the  RX366?
 
73 Ray W2RS
 
 
In a message dated 9/27/2011 12:55:07 P.M. GMT Standard Time,  
jhenry at tentec.com writes:

Current  plan is, the new RX366 will be available as:

1 - You purchase a kit,  install yourself. Fairly simple. Remove
top/bottom, remove tmps to current  A6 sub receiver, remove screws,
screw down RX366 system board, install  "eagle" parts (simple),
reinstall tmps. program in version 3 firmware, do  master reset, answer
Yes to "RX366 Installed" prompt. Cost = tbd.  Definitely will not come
anywhere near the cost of an Orion III. Not going  to be expensive at
all. JMHO.
2 - You send it in to TenTec to do. Cost =  cost of new sub receiver +
x hours labor.
3 - You purchase a new Orion  II with it installed instead of existing
A6 sub receiver. Haven't worked  this one out exactly yet.

Now, to get to testing it again so that we  can ship it....
Take care,
John  Henry
_______________________________________________
TenTec mailing  list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec