[TenTec] Orion II settings for 706 mic

[Rick - DJ0IP / NJ0IP]

Lee,

You have to keep in mind the difference between  "use" and "ship with".

Most radios can use (are compatible with), electret mics, but Icom may be
the only company that actually ships an electret mic with the radio.

Here in Germany there is a company that specializes in converting your
standard Kenwood, Ten-Tec, Yaesu mic into an electrets mic.  Costs about
$50.  You send them your old mic and get it back with an eletret capsul one
week later.

73
Rick, DJ0IP
 

-----Original Message-----
From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
On Behalf Of kc9cdt at aol.com
Sent: Thursday, April 05, 2012 10:58 PM
To: tentec at contesting.com; jhenry at tentec.com
Subject: Re: [TenTec] Orion II settings for 706 mic

Ray,
I thought the only radios to use electret mic were Icom radios??
73,
Lee


-----Original Message-----
From: Rsoifer <Rsoifer at aol.com>
To: jhenry <jhenry at tentec.com>; tentec <tentec at contesting.com>
Sent: Thu, Apr 5, 2012 1:59 pm
Subject: [TenTec] Orion II settings for 706 mic


FYI, here are the settings I've evolved for the 706 electret mic and
v3.028:

H/W Mic gain 3.0 dB
Front panel mic gain 40
TX EQ 0 dB for normal use, -5 dB for pileups SP no higher than 4; there's
still some distortion at higher levels

The 707 dynamic mic requires much more gain, with more distortion.  I have
verified that this distortion is not coming from RFI (that's a separate
issue).

73 Ray W2RS
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec