[TenTec] Additional audio out for Argosy 525

[Stephen Roberts]

The reader is functional with the existing set up but the added level of noise is interfering with the reader getting a clean audio signal.


On Apr 25, 2012, at 8:29 AM, Rick - DJ0IP / NJ0IP wrote:

> Steve,
> 
> Check the requirements of your external reader.
> It may be that it is expecting a signal from the "Line Out" of the radio,
> which the Argosy does not have (yet).
> You may need to tap into an earlier stage of the Argosy's audio, and indeed
> run a shielded cable, like RG-174 to the Spare Jack on the back.
> 
> Later Ten-Tec radios had this Line Out available on the Accessory Jack(s).
> 
> 73
> Rick, DJ0IP
> 
> 
> 
> -----Original Message-----
> From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
> On Behalf Of Stephen Roberts
> Sent: Wednesday, April 25, 2012 2:21 PM
> To: tentec at contesting.com
> Subject: [TenTec] Additional audio out for Argosy 525
> 
> GM,
> 
> I want to add an additional audio out for my Argosy so I can feed it to an
> external keyer/reader. I originally ran a wire from the phone jack to one of
> the spare RCA jacks on the back of the unit, but now have an added level of
> white noise that is always there even if the AF is turned all the way down.
> I'm thinking that that wire needs to be sheilded? 
> 
> Steve
> W1SFR
> 
> 
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec