[TenTec] Orion II/DX767 Pro Setup

[Richards]

I used that headset for awhile with my Omni VII and used the default 
audio settings - i.e., no EQ at all  with splendid results on both send 
and receive and nearly all my work is SSB... still...  I cannot yet hear 
the long CW letters, but that is because I don't practice every day... 
  but I digress...  you may want to have a friend listen to you on his 
receiver, and advise if you can improve your sending audio with a little 
EQ in the rig.   I do employ the bass roll-off feature - and set that to 
cut it a 200 Hz, which gives the middle frequencies a bit more punch. 
Whether or not you want to add in a little EQ should be determined by an 
on air test.   I make recordings of my local friends and they can hear 
for themselves how they sound on my rig, so maybe one of your friends 
can do that and you be the judge.

The earphone receivers and mic are fairly un-colored and "flat" so I 
think TT picked a good set of components for it.

Just MY take...

=====================  K8JHR  =========================

On 8/26/2012 8:16 AM, d.e.warnick at comcast.net wrote:

I haven't done anything to the settings in the rig & get excelloent 
results with great audio reports.
>

____________________________________________________













   ..