[TenTec] Model 282 filter problem

[Silevitch, Michael]

Thanks Al, I'll try that. 

Regards
    Michael

Sent from my iPad

On Dec 8, 2012, at 1:27 PM, "Al Gulseth" <wb5jnc at centurytel.net> wrote:

> Mike,
> 
> Before blaming the filter try tuning around and/or move the passband tuning 
> control (PBT) back and forth a bit. The 282 has an extremely narrow peak and 
> can sound like there's nothing there if you're not tuned in correctly on the 
> signal and/or properly centered on the passband. (Personal experience 
> here....)
> 
> 73 es GL, Al
> 
> On Fri December 7 2012 12:51:16 pm Silevitch, Michael wrote:
>> Does anyone have any insight into problems (and solutions) that would cause
>> failure in a Ten Tec model 282 (or any other similar model) crystal filter?
>> When the unit is plugged into its slot (on a Corsair) we get no response.
>> Our next step is to test it on a network analyzer but I felt it would be
>> worthwhile to also get inputs from people on the reflector.
>> 
>> Regards,
>>   Mike K1PEV
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec