[TenTec] Need parts for Argosy 525D

[Mike Hyder -N4NT-]

Roger, I replaced my 4-pole SSB filter with the Ten-Tec model 220, 8-pole 
SSB filter. Of all the things I ever did to that rig, replacing that filter 
was the very best investment I made. It made the Argosy sound like a real 
Ten-Tec ! ! You won't believe the difference.

73 and Merry Christmas to everybody.
Mike Hyder -N4NT-

----- Original Message ----- 
From: "Roger Ruszkowski" <flowertime01 at wmconnect.com>
To: <tentec at contesting.com>
Sent: Wednesday, December 19, 2012 12:35
Subject: [TenTec] Need parts for Argosy 525D
>
> Fellows,
> I need a filter for my Argosy 525.
> I have isolated my problem down to the filter.
>
> I think the easy out is just to replace the module.
>
> I have a 4 pole module part number 48057. NS1 or  MS1 8716
>
> Would any one have a module for sale?
>
> What after market parts could I use?
>
> I looked at some of the web pages and these
> were a clear as mud. My Ten Tec PDF file
> for the Argosy is not real clear about the
> filters band width and center frequency.
> This makes picking a replacement some what of
> a problem.
>
> Any comments on the filter's bandwidth and center frequency
> would be welcome.
>
> Thank you
> Roger Ruszkowski AI4NI