[TenTec] 565v3.026 ready at TenTec for download

[Barry N1EU]

On Fri, Feb 3, 2012 at 2:09 PM, jack <jfriend31 at comcast.net> wrote:
> thank you. I seldom use the sweep at all. now and again using the sweep
> causes the radio to fail requiring a reboot.
> jack
>

If you are running v3 firmware on your 565 and using the sweep causes
the radio to fail, then I would either try a RAM Clear or re-flash the
firmware.  Using the sweep should NOT cause the radio to fail.

If it continues to fail after the clear or re-flash, please report
back with the settings in use when the sweep fails.

Barry N1EU