[TenTec] Orion 2 ver 3.028 and N1MM

[Dave G3RXP]

Hello Barry,
Thank you for the reply-  almost fixed it looks like N1MM.  Now when 
switching VFO with the mouse it defaults to left hand phone is main and 
right hand phone is the sub. and L/S now stays with both.

Its nice to have experts around on this reflector to show guys like me where 
we go wrong.


73  Dave G3RXP





----- Original Message ----- 
From: "Barry N1EU" <barry.n1eu at gmail.com>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Sunday, February 26, 2012 10:33 AM
Subject: Re: [TenTec] Orion 2 ver 3.028 and N1MM


> In N1MM Logger, you need to turn on the "dual rx always on" option in the
> Config menu.
>
> Barry N1EU
>
> On Sun, Feb 26, 2012 at 10:24 AM, Dave G3RXP <g3rxp at btinternet.com> wrote:
>
>> Good Morning All,
>>
>> I wonder if there is someone who could point me in the right direction
>> with this query.
>>
>> When switching the TX from A to B VFO manually and back again it works
>> fine but when I load N1MM up and select either VFO A or VFO B by pointing
>> the mouse at the VFO  header it switches OK but I loose the AUDIO menu
>> setup on the Orion and all three selections i.e Left/Right phone and L/S
>> default to "Main".
>> Im using left headphone - "Main" and right Headphone - "Both" with L/S -
>> "Both".
>>
>> I will be buying the 2nd RX for the Orion and the Audio settings will be
>> as above.
>>
>> 73  Dave G3RXP
>> _______________________________________________
>> TenTec mailing list
>> TenTec at contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec