[TenTec] Omni VI+/960 PS down

[Ron Notarius W3WN]

I will, although I'd wonder why it would suddenly change...

-----Original Message-----
From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
On Behalf Of k3miy at csonline.net
Sent: Monday, January 16, 2012 7:52 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Omni VI+/960 PS down

Ron

Check the power supply trip voltage pot. Is the voltage above about 15
volts? It may need adjustment.

Ron
K3MIY 






Quoting Ron Notarius W3WN <wn3vaw at verizon.net>:

> Had something unexpected happen with my Omni VI+ & 960 power supply
earlier
> today.
> 
> Sequence of events:
> 
> Omni had been on for awhile listening to some PSK-31.  Worked some DX on
12,
> then shut it down, followed by the 960 (had an appointment to go to).
> 
> When I went to power it back up later, turned on the 960 first.  LED
blinked
> a couple of times.  Omni did not power back up.  Turned everything off.
Now
> the 960 does not appear to power up at all; no light on the LED, no
voltage
> output that I can measure.
> 
> Checked the fuse; it appears to be fine.  So my immediate guess is that
> something in the PS popped to protect the fuse...  although I'm not 100%
> certain, since I don't have a cable available to run the Omni from my
Astron
> PS (it's ordered, but won't be here for a few days.  Of course.)
> 
> Sound familiar to anyone?
> 
> 73, ron w3wn
> 
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 
> 




-------------------------------------------------------------------
This mail sent through CSOnline Webmail http://webmail.csonline.net

_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec