[TenTec] Omni VI+/960 PS down

[Rick W]

If a pass transistor has failed (shorted) that would trip the OVP.  Reset the relay BUT  before you try it on the rig put a meter on the output.
 
73,
Rick
VE7TK


Website:  http://www.ve7tk.com


To: "'Discussion of Ten-Tec Equipment'" <tentec at contesting.com> 
Subject: Re: [TenTec] Omni VI+/960 PS down 
From: "Ron Notarius W3WN" <wn3vaw at verizon.net> 
Date: Mon, 16 Jan 2012 19:34:08 -0500 
I will, although I'd wonder why it would suddenly change... -----Original Message-----
From: tentec-bounces at contesting.com
On Behalf Of k3miy at csonline.net
Sent: Monday, January 16, 2012 7:52 PM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] Omni VI+/960 PS down Ron Check the power supply trip voltage pot. Is the voltage above about 15
volts? It may need adjustment. Ron
K3MIY