[TenTec] My First Ten-Tec

[GARY HUBER]

Lee, I have to agree with your comments regarding your first impressions of 
TenTec radios. When I started using my first TenTec, the OMNI-D, it was so 
different from the Yaesu FT-101 in operation and feel, I was sure I had made 
a mistake. The feel of the OMNI-D internal and remote VFOs were not as 
smooth as the FT-101 and its remote VFO and generally the front panel knobs 
felt more like that of a Heathkit.  The philosophy of operation of the 
TenTec OMNI-D was quite different too.... audio derived AGC, with maximum 
sensitivity achieved turning the RF gain fully counter clock-wise, then 
turning the AF gain for comfortable listening or increasing RF gain for 
comfortable listening if AF gain was full clock-wise.

But after a couple weeks I grew to understand I had a really great radio 
with dual receive (remote VFO) for working DX and in particular CW DX using 
QSK, and the AUX RX option to provide a protected on TX switched antenna 
connection for the R4-B receiver. On several occasions I was asked by 
visiting HAMs if the receiver was working, as the radio was so quiet until 
there were signals within the bandpass of the OMNI-D.

The CORSAIR-II is much the same, it’s a 80 dB dynamic range, 0.2 uV 
sensitivity radio, the last of the TenTec PTO based radios.  As such it’s a 
very good radio for working DX and one I recommend for anyone who does not 
have to have the latest DSP and computer controlled radio.  The CORSAIR-II 
contains identifiable, available components so it can still be repaired but 
seemingly it needs to be exercised to keep the capacitors formed and 
potentiometers and contacts free of corrosion. I've found I had more 
problems with my CORSAIR-II as the result of infrequent use than when used 
nearly every day.


73 ES DX,
Gary -- AB9M
-----Original Message----- 
From: Lee WA3FIY
Sent: Wednesday, July 04, 2012 9:04 AM
To: Discussion of Ten-Tec Equipment
Subject: Re: [TenTec] My First Ten-Tec

My first Ten-Tec was a Corsair II purchased new.  Prior to the Corsair I had 
an Icom 701 with
which I was not at all happy.  It had intermittent failure in the VFO from 
early on.  Sent back to
Icom for repair twice.  No luck.  Icom's answer was to buy a new rig......I 
did.....the Corsair II.
I thought at the time it was a BIG step backward.  Turned out to be one of 
the best purchases
I ever made!

When I turned the Corsair on for the first time and did some preliminary 
testing and set-up I
thought for sure the rig was broken.  When I keyed it I heard CW sidetone ok 
but with the key
up I instantly heard band noise and nothing else.  I got the impression it 
was not going into
transmit mode.  It was operating fine.  Welcome to Ten Tec QSK!  Took me a 
year or so to
become accustomed to QSK but now cannot imagine operating any other way.

Still have that radio and a few other TT's as well.  My daily driver is a 
Pegasus/N4PY/RX320
combo though which is nearly perfect for my present operating style but I 
still use the Corsair
from time to time.  In fact, it is on line as I type this.


73,

-Lee-

WA3FIY
_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec