[TenTec] Paragon Problem

[Phil Chambley, Sr.]

Hi Ben...

Do you have any way of checking the ripple on your PS?  Sounds like some AC 
may be tripping your Logic Board.

Can you try another supply?

Phil C. Sr.
k4dpk
----- Original Message ----- 
From: "Ben Hall" <kd5byb at kd5byb.net>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Friday, July 13, 2012 8:53 PM
Subject: [TenTec] Paragon Problem


> Good afternoon all,
>
> I've got a Ten-Tec Paragon (with matching 962 power supply) that is
> having a problem and I'm hoping there is an easy fix that doesn't
> require a trip back to the factory for repair.
>
> Here's what happens - when I turn it out, all of the LED indicators
> light up for a split second and then it turns off.  The power LED on the
> power supply goes off at the same time.
>
> I disconnected the power supply, jumpered the two center pins, and its
> putting out a nice 13.80 volts.  Even under a 15 amp load (the highest
> my electronic load will do!) its still putting out 13.3 volts.
>
> Depressing the reset button does nothing.
>
> Thoughts?
>
> thanks much and 73,
> ben, kd5byb
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>