[TenTec] need a TenTec parts/junker IF filter

[Barry N1EU]

Pete, just wanted to mention a couple of other options.  Last I
checked, Inrad will sell the carrier board for about $10.  You can
also make your own carrier board - I used Radio Shack perf board (with
plated holes) plus Digikey p/n ED5052-ND pins to fashion a board for
my Omni C which has a non-standard 9Mhz socket.

73,
Barry N1EU

On Mon, Jun 4, 2012 at 3:40 PM, Peter Bertini <radioconnection at gmail.com> wrote:
> Hello to the group
>
> I am looking for a junker TenTec filter board.  I need a "carrier"
> board that fits the Omni, etc, radios.  Inrad uses a part number
> 106 carrier board, and that would work great... or a defective
> TenTec filter could be adapted. You can keep the crystal elements,
> etc. I just need a bare board with the pins...
>
> thanks,
>
> Pete k1zjh
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec