[TenTec] Ten Tec 301 encoder

[Jerry Haigwood]

Streve,
    I don't have any problems with the links on
<http://users.hal-pc.org/~kg5u/301.html>.  The schematic is so simple it is
pathetic.  All it consists of is a 125 pulse Quadrature, two channel (A/B)
encoder, connecting cable, and DB25M.  Pretty simple.  It could be
duplicated easily.

Pin 1 and 14 of DB25M is ground
Pin 6 connects +5VDC to the encoder
Pin 8 of DB25M connects to channel A of encoder
Pin 16 of DB25M connects to channel B of encoder

That is it!
Jerry W5JH

-----Original Message-----
From: tentec-bounces at contesting.com [mailto:tentec-bounces at contesting.com]
On Behalf Of Steven Garwood
Sent: Monday, March 12, 2012 9:51 AM
To: 'Discussion of Ten-Tec Equipment'
Subject: Re: [TenTec] Ten Tec 301 encoder

Found that page on a Gooogle search - links to the pictures and schematic
don't work anymore - page is dated 2001.  

Steve, N0CZV


http://users.hal-pc.org/~kg5u/301.html

Barry N1EU

On Mon, Mar 12, 2012 at 1:33 AM, Steve Garwood <n0czv at frontier.com> wrote:

> Does anyone have information on the TT301 encoder?  Looking to see if 
> there are any similarities to the newer 302...  Two different animals, 
> but maybe the encoder part could be rewired?  I don't imagine there 
> are too many 302's around..  There are a couple of websites that have 
> references, but appear to broken or at least not working for me.  
> Thanks!
>
>
>
> Steve, N0CZV
> 


_______________________________________________
TenTec mailing list
TenTec at contesting.com
http://lists.contesting.com/mailman/listinfo/tentec