[TenTec] Corsair II RF Gain

[Carl Moreschi]

You realize when you do this you are essentially turning AGC off and 
running manual AGC.  That's the way we ran the old radios in the 50's 
and the way I used to run my Collins 75A1.  I like to think the new 
radios have much better AGC and this is no longer necessary.

Carl Moreschi N4PY
121 Little Bell Dr.
Hays, NC 28635
www.n4py.com

On 3/20/2012 1:06 PM, GARY HUBER wrote:
> If I'm understanding your question;
>
> I found the BEST (for me) was to first set the RF Gain fully counter-clock
> wise (minimum setting), then set the AF Gain to full clock-wise (or nearly
> so) then increase Clock-wise the RF Gain to set the audio level.
>
>
> 73 ES DX,
> Gary -- AB9M
>
> -----Original Message-----
> From: Straate
> Sent: Monday, March 19, 2012 10:00 PM
> To: tentec at contesting.com
> Subject: [TenTec] Corsair II RF Gain
>
> Is there anyone out there who has a Corsair II that can give me some
> information.  I am looking for the setting on the RF Gain control when the
> signal disappears.  If you are looking at the control from the front, what
> is the setting on the scale does the signal disappears?  The control is wide
> open at the 10 position and then you rotate counter-clockwise to reduce the
> gain.  Appreciate some feedback.
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>