[TenTec] 564

[Jim Goudie]

Another standard bit of advice for all sorts of flaky problems with the Omni VI is to "exercise the connectors"... and perhaps carefully clean them with DeoxIt and PerservIt in the process.  The connectors are all those cable connectors going from board to board, and board to front panel controls and such.  Exercising the connectors is simply a fancy way of saying unplug and replug them a few times to make sure they are making good connections.  

And, don't do what I did once and forget exactly how it was plugged in (leaving one pin unconnected...).  I have had some problems solved this way.

Jim,
AF3Z