[TenTec] Corsair II RF gain

[Paul DeWitte]

I have 2 Corsair IIs. I have found that for a weak signal on a noisy band, 
turn up the AF gain and then back off the RF gain until just before you 
loose everything.
There is a very narrow spot in there that you can eliminate most of the band 
noise, but not loose the signal. Back it off a bit more and all is lost.

This is basically what Gary said in his first post.

Also play with the band pass filter. Both of these adjustments may change 
from band to band, and noise conditions.

Just my opinion,
73 Paul K9OT