[TenTec] Corsair II RF Gain Problem

[Steve Hunt]

I don't think that indicates a problem.

I have two CorsairIIs - one of them "turns off" at 7.5 on the RF Gain, 
and the other one at 4.

73,
Steve G3TXQ


On 22/03/2012 00:46, Russ Straate wrote:
> Group.  Thanks for the feedback on the RF Gain.  It appears I have a
> problem with my rig.  The RF gain only operates over a very narrow range
> when rotating the control.  At about the 6 marking on the dial, the signal
> disappears.  The receiver appears to be fine with when wide open so it does
> not appear that the receiver level is low.  I have checked the pot with the
> wires disconnected an it shows the 10K ohm range as it should.  Any
> thoughts on where else I should look?
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>