[TenTec] Problem with Orion II and N1MM Logger

[Rod Greene]

I know this is just before SS SSB ..... 

Problem:
When I click
 on a function key to send a .wav file, something in Logger resets my 
Mic gain setting on the Orion to zero. If I turn up the Mic gain setting
 while the .wav file is playing, the audio gets transmitted. Then when I
 click on a function key the next time, the Mic gain is set back to zero
 again. After the message plays, the Mic gain is restored to normal 
level. Don't know if that makes sense. It's just when the function key 
is pressed and the message is playing, that the Mic gain gets set to 
zero. After the message is done, the Mic gain reverts to normal setting.

I have been working on this for hours, and can't find the setting that does this. 

I tried using an old version of Writelog and it works fine for playing recorded messages. ie, it doesn't mess with
 the Orion's Mic gain. 

By the way, I'm using an original MicroKeyer for the interface. However, I don't think it's the problem. 

Sure would appreciate some idea of what to look for. I'll cross post this to the Orion reflector.

Thanks and 73. Good luck in the SS 

Rod/w7zrc