[TenTec] OT: Question about TS-590 possible problem

[Dave Edwards]

Replace one with a TR4C, replace the other with an SB102!
....Sorry, but I remember many years ago when I used to go to Field Day 
with
K2LSA....around the late '70s, when all those old tube rigs were 
replaced with
FT101's and TS520's....we had wicked problems like this.
We ended up getting single band low pass filters from ....?? someone 
that advertised in QST.
This solved the problem!
....Dave

On 10/5/2012 12:43 PM, Rick - DJ0IP / NJ0IP wrote:
> A couple of my friends are preparing for an expedition for CQWW and are testing their config.
> They have 2x TS-590 transceivers and a pair of yagi antennas in close proximity of each other (about 75' apart).
>
> The problem, they are seeing a broadband noise as soon as they key one of the transceivers.
> Even with just 5w of power it is wiping out the other rig on all bands.
>
> My old grey cells seem to remember we discussed this here on the Ten-Tec reflector about 6 months ago or so.
> Does anyone remember the details of this or do I have my wires totally crossed?
> Was there a fix or have I dreamt this up?
>
> TNX guys, and sorry to spam the group, but if we can get these guys fixed, we'll have a nice multiplier in CQWW.
>
> 73
> Rick, DJ0IP
>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>