[TenTec] RASCAL interface and the Orion 565

Rick W ve7tk at yahoo.ca
Tue Oct 16 23:57:32 EDT 2012

Jack is correct the Orion AUX jack has output that can be used for AFSK .  FSK on the other hand is more of an issue.  If your friend is using the Ten-Tec AUX cable for FSK I'm afraid he's out of luck.  That cable does not bring out the FSK output.  He'll have to build up a new cable or perhaps purchase one from a 3rd party.

I'm using a US-Interface Navigator and it keys the rig with the PTT on pin 3 and sends FSK on Pin 7 of the AUX jack.  It has it's own DIN connector and privides access to all pins on the Orion's AUX jack.

Also, if your friend has an "early" 565 he may need to add a 10k pull up resistor between pin 7 of the AUX connector and pin 8 of the REMOTE jack. 



Website:  http://www.ve7tk.com

To:Discussion of Ten-Tec Equipment <tentec at contesting.com> 
Subject:Re: [TenTec] RASCAL interface and the Orion 565 
From:"k0bx at arrl.net" <k0bx at arrl.net> 
Reply-to:Discussion of Ten-Tec Equipment <tentec at contesting.com> 
Date:Tue, 16 Oct 2012 17:35:17 -0700 (PDT) 
List-post:<tentec at contesting.com">mailto:tentec at contesting.com> 
That is very good Jack, the problem is that I am not the owner of the Orion but 
my friend W0TT is.  I am trying to get him on RTTY.
Maybe you could send me a note off line on what cables you are talking about?
We do want to be able to use FSK and NOT AFSK.  And do CW without changing 
cables. Joe K0BX Stop the insanity!
Please do not add me to any distribution lists (Joke, Stories or Junk) without 
my permission. ________________________________
From: jack <jfriend31 at comcast.net>
To: Discussion of Ten-Tec Equipment <tentec at contesting.com>
Sent: Wed, October 17, 2012 12:31:38 AM
Subject: Re: [TenTec] RASCAL interface and the Orion 565 One does not need a Rascal for RTTY with the Orion. one can use the cables that 
came with Orion for RTTY direct to the computer. I have done exactly that for 
all the years I have had my Orions 565, mostly CW but MixW3 will do all modes 
just about with the above cable connections to computer.

More information about the TenTec mailing list