[TenTec] TenTec Digest, Power Supplies
Don Allen
w9cw at yahoo.com
Sat Sep 8 13:50:22 EDT 2012
I use two Astron RS-35M supplies which are on the carpeted floor beneath
the operating desks for the HF rigs, with the exception for the 280
linear for my old Omni A Series B. I've tested a number of switching
supplies, including the Astron SS-30M, the Samlex units, and others.
The best of the lot IMO is the Alinco DM-330MV (built in Japan BTW). I
have one in my station, but only use it for my VHF/UHF gear. I've used
it on HF for testing purposes, and it's good, plus you can move any
perceptible hash off frequency with the noise offset control - a rather
unique feature. And, most important for a switcher, the fan is
practically inaudible due to the extensive use of heat sink - the entire
top of the PS is a heat sink. The Chinese have copied the Alinco
design, and several companies, such as QJE, now sell it, but I assure
you the performance is not the same.
73
Don W9CW
On 9/8/2012 12:20 PM, Richards wrote:
> Ah... yes.... and therein lies the rub...."almost no noise" is not as
> good a "none." My TT Model 963 switcher produces noticeable noise on
> frequencies outside the ham bands.
>
> I did notice TT no longer sells the Astron-made Model 963, and I
> believe (i.e., guess) the current model is made by Samlex.
>
> I would probably try a Samlex supply if I wanted another switcher, for
> the above, and other reasons.
>
> ---------------------- K8JHR --------------------------------
>
> On 9/8/2012 11:40 AM, Carl Moreschi wrote:
>
> The current switcher supplies are now mostly very good and
>> produce almost no RF noise.
>>
> ___________________________________________
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
More information about the TenTec
mailing list