[TenTec] Paragon logic board

[Bob McGraw - K4TAX]

Have you changed the timing cap, 4.7 mf as I recall, on the RESET line at 
the microprocessor.  Sounds like the processor is running before all of the 
operating parameters are loaded.  I suggest using  one a bit larger up to a 
10 mf to assure things start in the correct sequence.  This just slows 
things down a bit during initialize.

73
Bob, K4TAX




----- Original Message ----- 
From: "Mike Bryce" <prosolar at sssnet.com>
To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
Sent: Tuesday, August 20, 2013 7:50 PM
Subject: [TenTec] Paragon logic board


> Well gang, the subject line says it all.
>
> I am in need of a paragon logic board.
>
> There is no display, all the LEDs light up, or some LEDs light up, or 
> randomly they light up at power turn on.
>
> Thought it might be a reset problem, but so far I have not been able to 
> track it down.
>
> This one is a real head scratcher.
>
> Mike WB8VGE
>
> Sent from my iPad
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>