[TenTec] Herc 2 LP Cap?

[Wade Staggs]

On the Schematic.... Does it read something like ... All values in Pf
unless otherwise specified? Since the Cap is a Big Yellow Disc, my Best
Guess is that it is 100 PF and because it is Big .... it may be rated at
some Serious Voltage. When in doubt, I always call Ten Tec Service and
Ask.. Paul Clinton and the group have ALWAYS made time to give advise and
clarify parts values for me. There is nothing better than talking to the
service manager. He may even have some insight into why the Cap failed.
These guys are Great. Just go to Ten Tec dot com and look for the phone
number for the service dept. This is why we always say " Legendary Ten Tec
Service " Remember that I said Best Guess!

   73 From Wade/KJ4WS


On Mon, Aug 26, 2013 at 3:03 PM, John Huffman <hjohnc at gmail.com> wrote:

> I burned up a capacitor in the low pass filter of my Hercules 2 amplifier.
>
> According to the schematic it is C42 with a value of "100".
>
> I'd like to replace it.  Is "100" the value on the schematic in PF? It's a
> big yellow disk.  What voltage cap should I buy?
>
> 73 de K1ESE
> John
>
>
> ______________________________**_________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/**mailman/listinfo/tentec<http://lists.contesting.com/mailman/listinfo/tentec>
>