[TenTec] New 703 Mic

[John Huffman]

Thanks for the interest.  I'm happy with the way it is now.  No project 
for me, but good luck if you go ahead.

73 de K1ESE
John


On 2/2/2013 2:04 AM, Richards wrote:
> What would happen if you swapped the switch out?
> I think that is what I would try to do, as the problem
> continues but is, now, minimized.  You can use the
> current switch until we determine a quiet replacement.
>
> Is there any reason we could not scour the planet
> and find a better, quieter switch?   I would pitch in
> on that project.  It might assist others, as well.
>
> Happy days.
> ______________  K8JHR  ____________________
>
> On 2/1/2013 1:43 PM, John Huffman wrote:
>
>
>> I have minimized the button noise by snipping off a bit of the switch
>> plunger inside the mike.  Now the button activates the PTT just a bit
>> before its travel limit.  Thus, the noise and scratching the mic puts
>> out over the air is now restricted to that last bit of button travel.
> ___________________________________________
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>