[TenTec] Hercules II & Orion

[Eric Rosenberg]

Most certainly yes!

What you need is the Model 311 converter box that runs between the Orion 
and Herc II. That's all.

While I don't believe the 311 is available anymore, the schematic is 
floating around. Others have built the from scratch.

GL!

73,
Eric W3DQ
Washington, DC



> Message: 13
> Date: Sat, 23 Feb 2013 13:16:20 -0600
> From: "Paul A. Ramey"<wg0g at arrl.net>
> To:tentec at contesting.com
> Subject: [TenTec] Hercules II  & Orion
> Message-ID:<51291584.4090803 at arrl.net>
> Content-Type: text/plain; charset=ISO-8859-1; format=flowed
>
> I have a Hercules II that is currently wired for remote use with my Omni
> VI+.
> Can the Hercules be used in remote mode with a Orion by changing the
> plug to match the Orion's band data 15-pin plug or is the Orion
> different than the Omni as the the band data it output?
> I would like to use the Hercules on the second VFO/sub RX for S&Ping.
> If it works Then I can keep my main amp tuned to my run freq.
>
> Thanks
>
> Paul, WG0G
>