[TenTec] Replacement Speakers for Older TenTec Transceivers.

[Mike Hyder -N4NT-]

OK. Here's the skinny on the Jameco speakers, straight from a Jameco rep's 
mouth. The model 99995 which I purchased six of back in 2003 has been 
replaced by the Jameco model 99996. The only difference between the older 
and newer models is that the 99996 now available is "RoHS compliant," which 
means that it is free of lead (for any of you speaker eaters). I can now 
heartily recommend the Jameco model 99996 speaker as a direct replacement 
for the original internal speakers in older Ten-Tec rigs. I have put them in 
Tritons, Omni-C's, 580 Deltas and a Corsair II.

Here again is the link to the speaker >
 http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_99996_-1?CID=PDFSorry for the confusion but the 5 did look exactly like a 6 on my speaker.73, Mike Hyder -N4NT------ Original Message -----From: "Mike Hyder -N4NT-" <Mike_N4NT at charter.net>To: "Ten-Tec Reflector" <tentec at contesting.com>Sent: Thursday, January 03, 2013 11:32Subject: Re: [TenTec] Replacement Speakers for Older TenTec Transceivers.> Sorry. After getting out my magnifier I see that the speaker number I usedwas the 99995 AND NOT THE 99996. I cannot vouch for the 99996. Sorry for theconfusion.>> 73, Mike N4NT>> ----- Original Message -----> From: "Mike Hyder -N4NT-" <Mike_N4NT at charter.net>> To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>> Sent: Thursday, January 03, 2013 11:28> Subject: Re: [TenTec] Replacement Speakers for Older TenTec Transceivers.>>>>I bought a number of these speakers from Jameco several years ago andinstalled several in Ten-Tec rigs. They fit perfectly and are stouterspeakers than the original. You can tell by the magnet structure. Here isthe link to the 99995 speaker at Jameco >http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_99996_-1>>>> 73, Mike -N4NT->>>> ----- Original Message ----->> From: "Jack Van Demark" <wn5a at sbcglobal.net>>> To: <tentec at contesting.com>>> Sent: Tuesday, January 01, 2013 18:26>> Subject: [TenTec] Replacement Speakers for Older TenTec Transceivers.>>>>>>>I need a replacement speaker for my TenTec Argonaut 509.  TenTec nolonger sells them. This one is a 2.5" diameter  round  8 Ohm speaker. Hasanyone found a source that I can get a replacement.>>> Thanks>>> and Happy New Year>>>>>> Jack WN5A>>>>>>>>> _______________________________________________>>> TenTec mailing list>>> TenTec at contesting.com>>> http://lists.contesting.com/mailman/listinfo/tentec>>>