[TenTec] replacement speaker for 961/962 power supply?

[Mike Hyder -N4NT-]

Suggest you look in your supply at the speaker and take its measurements. 
Then I'd go to that Jameco site and find one that fits. You can go other 
places, perhaps but I do know the quality of the speaker elements I bought 
from Jameco and it was excellent.

73, Mike N4NT

----- Original Message ----- 
From: "Allan Taylor" <k7gt.cw at gmail.com>
To: <tentec at contesting.com>
Sent: Wednesday, January 09, 2013 11:40
Subject: [TenTec] replacement speaker for 961/962 power supply?


>A thread of late concerns replacement speakers for older TT transceivers.
> It seems a perfect
> fit has been found. I need to replace the speaker in one of my TT power
> supplies (either a 961
> or 962, haven't looked on back lately!). Will the speaker spec'd below fit
> in the power supply?
> Has anyone replaced the speaker in a 961/962?
>
> Regards
>
> Allan K7GT
>
>
> Message: 12
>> Date: Sat, 5 Jan 2013 18:33:13 -0500
>> From: "Mike Hyder  -N4NT-" <Mike_N4NT at charter.net>
>> To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>,
>>         <barry.n1eu at gmail.com>
>> Subject: Re: [TenTec] Replacement Speakers for Older TenTec
>>         Transceivers.
>> Message-ID: <0681EC85F4684CB8B1D8C6D859F87D25 at dell8300>
>> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
>>         reply-type=original
>>
>> I think I put one in the Corsair II but I've since lost it and cannot 
>> tell
>> you. The new speaker with the other rigs I mentioned mounts inside the
>> cabinet and the mounting holes mate up with the screw holes in the square
>> external cover - best I remember from 2003. I put them in at the 
>> suggestion
>> of a fellow on this reflector who said they were of stouter quality and
>> improved the sound of the rig and they surely did do that and were a
>> perfect
>> fit..
>>
>> Mike N4NT
>>
>> ----- Original Message -----
>> From: "Barry N1EU" <barry.n1eu at gmail.com>
>> To: "Discussion of Ten-Tec Equipment" <tentec at contesting.com>
>> Sent: Friday, January 04, 2013 17:22
>> Subject: Re: [TenTec] Replacement Speakers for Older TenTec Transceivers.
>>
>>
>> > Mike, the Jameco speaker actually screws right in where the old Corsair
>> II
>> > speaker was without modification/drilling/adapting?  If so, that's
>> > amazing.
>> >
>> > Tnx/73,
>> > Barry N1EU
>> >
>> > On Thu, Jan 3, 2013 at 11:48 AM, Mike Hyder -N4NT-
>> > <Mike_N4NT at charter.net>wrote:
>> >
>> >> OK. Here's the skinny on the Jameco speakers, straight from a Jameco
>> >> rep's
>> >> mouth. The model 99995 which I purchased six of back in 2003 has been
>> >> replaced by the Jameco model 99996. The only difference between the
>> older
>> >> and newer models is that the 99996 now available is "RoHS compliant,"
>> >> which
>> >> means that it is free of lead (for any of you speaker eaters). I can 
>> >> now
>> >> heartily recommend the Jameco model 99996 speaker as a direct
>> replacement
>> >> for the original internal speakers in older Ten-Tec rigs. I have put
>> them
>> >> in Tritons, Omni-C's, 580 Deltas and a Corsair II.
>> >>
>> >> Here again is the link to the speaker >
>> <
>> http://www.jameco.com/webapp/wcs/stores/servlet/Product_10001_10001_99996_-1?CID=PDF
>> Sorry for the confusion but the 5 did look exactly like a 6 on my 
>> speaker.
>> 73,
>>
>>
>>
>>
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec