[TenTec] OMNI V

[k3miy at csonline.net]

Tim

there is an RX ANT switch on the back. Exercise it a few times.
See if that clears the problem.

Ron
K3MIY


Quoting wa5yom <wa5yom at swbell.net>:

> I have an OMNI V that had some Lightning Damage. Only minor repairs (by 
> Ten-Tec) were required.
> 
> After a couple of months worth of operation...some new symptoms have arose.
> 
> 1. The receiver cuts in and out, anywhere from no reception, reduced 
> reception to overload.
> 2. These symptoms are accompanied by transmitter problems, no-output or 
> output needs to be re-tuned at the ant. tuner.
> 
> This is not an antenna problem, I put another rig on-line and it worked 
> fine.
> 
> Any thought of what the problem might be?
> 
> Thanks,
> 
> Tim
> WA5YOM
> _______________________________________________
> TenTec mailing list
> TenTec at contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 
> 




-------------------------------------------------------------------
This mail sent through CSOnline Webmail http://webmail.csonline.net